Setting The Password For The Tivoli San Manager Agent; Starting And Stopping The Tivoli San Manager Agent; Showing Or Changing The Boot State Of The Tivoli San Manager Agent - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Setting the password for the Tivoli SAN Manager agent

You must gather the following information to set the TSANM server password:
v TSANM Manager ID (this is set at the server)
v TSANM Manager password
v Authorized Password (this is the password that allows the TSANM agent to
SMIT fastpath
The SMIT menu fastpath command is smit tsanmasetpass.
Go to SMIT→Manage Applications→SAN Management with Tivoli SAN
Manager→Set Password for SAN Manager Agent. Move the cursor to Entry Fields
to enter or select values. Press Enter.
WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSANM→Configure TSANM Agent
password→specify settings→OK.

Starting and stopping the Tivoli SAN Manager agent

SMIT fastpath
The SMIT menu fastpath command is smit tsanmasetstate.
You can use SMIT to start and stop the Tivoli SAN Manager agent. Go to
SMIT→Manage Applications→SAN Management with Tivoli SAN Manager→Start /
Stop Tivoli SAN Manager Agent. Move the cursor to Entry Fields to enter or
select values.
Change the state to start or stop and then press Enter to start or stop the Tivoli
SAN Manager agent process.
WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSANM→Start or Stop TSANM Agent→specify
settings→OK.

Showing or changing the boot state of the Tivoli SAN Manager agent

The default for Tivoli SAN Manager agent is off (not to start on boot). The Start /
Stop Tivoli SAN Manager Agent panel only starts and stops the Tivoli SAN Manager
agent process. If the NAS Administrator wants the process to start all the time, then
the boot state of the Tivoli SAN Manager agent needs to be changed to on.
SMIT fastpath
The SMIT menu fastpath command is smit tsanmasetboot.
Go to SMIT→Manage Applications→SAN Management with Tivoli SAN
Manager→Show / Change Boot State of Tivoli SAN Manager Agent. Move the
cursor to Entry Fields and change the Boot state to on. Press Enter. When the
change is entered, the Tivoli SAN Manager agent process will start on boot.
WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSANM→TSANM Agent Boot Option→specify
settings→OK.
communicate with the TSANM server).
Chapter 21. Managing applications
97