Table of Contents
Advertisement
1. The first Volume configuration panel selects the node that owns the NAS
Figure 30. Select a node panel
2. A Volume selection panel appears. A physical volume is the physical hard disk
60
NAS Gateway 500 Administrator's Guide
volume that you are creating. (To skip this wizard and create NAS volumes later,
click Next and then click Skip on the next panel.)
The node that you select on this panel determines the physical disks that
appear on the next panel. This panel reappears for each NAS volume you
create.
or hard disks that the newly created NAS volume allocates. In the Volume
selection panel below, you must select one or more physical volumes from
which you want to allocate disk space and click Add. Your selection appears in
the Selections box. Once you have selected all the hard disks you require for
this NAS volume, click Next.
Note: If you have not configured your external disk storage system, a panel is
displayed alerting you to configure your storage prior to running the
Volume Wizard. If you would like to configure NAS volumes at a later
time, you can click Skip.
Advertisement
Table of Contents
