Configuring The Tsm Storage Agent; Starting And Stopping The Tsm Storage Agent - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Hide thumbs Also See for TotalStorage NAS Gateway 500:
Table of Contents

Advertisement

For more information about TSM server version 5.2, refer to
http://publib.boulder.ibm.com/tividd/td/tdprodlist.html#S.

Configuring the TSM storage agent

The Tivoli Storage Manager (TSM) storage agent version 5.2.2 comes installed on
the NAS Gateway 500 and has been disabled from starting on boot until
configuration is performed. To configure the TSM storage agent:
1. Refer to chapters 2, 3, and 4 in the Storage Agent User's Guide for AIX Version
2. Root access to the NAS Gateway 500 machine is required.
3. SAN paths to all devices are required for the TSM storage agent to work
4. After the prerequisite work is completed, you need the following information to
SMIT fastpath
The SMIT menu fastpath command is smit tsmasetconfig.
To use the SMIT interface, go to SMIT→Manage Applications →Backup and
Recovery with Tivoli Storage Manager (TSM)→Configure TSM Storage Agent.
Move the cursor to Entry Fields to enter or select values. Press Enter.
WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSM→Configure TSM Storage Agent→specify
settings→OK.

Starting and stopping the TSM storage agent

After the information has been entered and saved, you can use SMIT to start or
stop the TSM storage agent.
SMIT fastpath
The SMIT menu fastpath command is smit tsmasetstate.
Go to SMIT→Manage Applications →Backup and Recovery with Tivoli Storage
Manager (TSM)→Start/Stop TSM Storage Agent. Move the cursor to Entry Fields
to enter or select values. Change the state to Start or to Stop and press Enter to
start or stop the TSM storage agent process.
WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSM→Start or Stop TSM Storage
Agent→specify settings→OK.
5.2 at http://publib.boulder.ibm.com/tividd/td/tdprodlist.html#S for information
about the prerequisite work required to configure the TSM storage agent on the
NAS Gateway 500.
properly.
configure the TSM storage agent using the NAS Gateway 500 SMIT interface:
v Storage agent name
v Storage agent password
v Storage agent TCP/IP address
v TSM server name
v TSM server password
v TSM server TCP/IP address
v TSM Server TCP/IP port
Chapter 21. Managing applications
95

Advertisement

Table of Contents
loading

Table of Contents