IBM TotalStorage NAS Gateway 500 Administrator's Manual page 256

234
NAS Gateway 500 Administrator's Guide
Table 12. Dialer parameters (continued)
Parameter Description
! Primary Telephone The telephone number the modem calls out to is populated
Number according to the location selected. Change this telephone number
only if needed.
Note: Depending upon the local telephone exchange, this number
may need to be modified to utilize your outgoing number and area
code requirements.
Secondary Location The second or backup country or city the modem is calling to.
! Secondary The telephone number the modem uses to call in the event the
Telephone Number primary telephone number fails.
! Account The Service Agent network login account assigned by IBM. This
can vary depending upon Location. Auto-filled does not change.
! User ID The Service Agent network login user ID. This can vary depending
upon Location. Auto-filled does not change.
! Password The Service Agent network login password. This can vary
depending upon Location. Auto-filled does not change.
! Primary Route - IP The IP address for the SDR. This can vary depending upon
address SDR Location.
Secondary Route - The full hostname or IP address route for the SDR to use in the
IP address SDR event the primary route fails.
Add DNS entries to This set to true adds the primary and secondary nameservers to the
/etc/resolv.conf /etc/resolv.conf file when initiating a dial, and removes them at the
completion of the call. Setting to false prevents use of resolv.conf
file.
! Primary DNS The primary DNS IP used to access IBM SDR during dialing.
Secondary DNS The secondary DNS IP used to access IBM SDR during dialing.
! TTY # The available port number the modem is physically connected to.
Modem The modem's reset and initialization string values are populated
according to the modem selected. Change these values only if
needed.
Tip: Type the first letter of the name to move quickly through the
list.
Baud Rate The maximum value the TTY modem will be set at for connection:
0 = 1,200
1 = 2,400
2 = 4,800
3 = 9,600
4 = 9,600
5 = 19,200
6 = 28,800
7 = 33,600
8 = 38,400
9 = 5,600
Reset String The modem's initialization string values are populated according to
the modem selected. Change these values only if needed.
Init String The modem's reset string values are populated according to the
modem selected. Change these values only if needed.
! Dial Type Select the dial type of this modem (i.e. tone or pulse).