Lock the wrist strap tight around your wrist to keep good contact with the skin.
2.
Insert the ESD-preventive wrist strap into the specially designed hole on the switch chassis or attach
3.
it to the grounding screw of the chassis with the alligator clips.
Make sure that the ESD-preventive wrist strap is well grounded.
4.
Figure 15 Use an ESD-preventive wrist strap
Switch moving
When you move an H3C S12500 switch, note the following guidelines:
Remove all the external cables (including the power cables) before moving the chassis.
•
•
For personal safety, have several persons to move the switch carefully.
When moving the switch, hold the handles at both sides of the chassis. Do not hold the plastic panel
•
of the chassis, the handle of the fan tray, the handle of the back cover of the chassis, or the air vents
of chassis. Any attempt to carry the switch with these parts may cause equipment damage or even
bodily injury.
WARNING!
For personal safety, at least four people are required to move an S12518 switch.
Laser safety
The H3C S12500 switches are Class 1 laser devices.
18