Power Components Ordering Guide - H3C S12508-AC Installation Manual

Model
LST1NSM1A1
LST1LB1A1
LST1ACG1A1
CAUTION:
The software upgrade of OAA cards must be performed though console ports or Ethernet ports on the
OAA cards, rather than the MPU.

Power components ordering guide

Select AC or DC power components according to the power supply mode of your switch.
Choose power modules based on your actual needs. Make sure that the maximum output power of
•
the power modules exceeds the system power consumption (H3C recommends reserving a certain
power de-rating value). For the maximum output power of a single power module, see
H3C recommends you to configure N+1 or N+M power supply redundancy.
•
To use AC power module, select the specific 16 A AC power cords. For the 16A AC power cords
•
used in different countries or regions, see
Interfaces
•
One console port
•
One CF card slot, supporting a 256M, 512M, or 1G CF
card
•
Two USB ports
•
Two 10/100/1000 BASE-T copper ports
•
Two GE combo interfaces
•
One console port
•
Two USB ports
•
Two 10/100/1000 BASE-T copper ports
•
Two GE combo interfaces
•
One console port
•
One CF card slot, supporting a 256M, 512M, or 1G CF
card
•
Two USB ports
•
Two 10/100/1000 BASE-T copper ports
•
Two GE combo interfaces
Table 46.
119
Supported interface
modules
GE SFP modules
GE SFP modules
GE SFP modules
Table 45.