H3C S12508-AC Installation Manual page 147

After binding the cables, cut the excess from the ties, leaving no sharp or angular tips. See
•
75.
Figure 75 Cutting the cable ties
When you bend cables, bind cables as shown in
•
excessive stress, do not tie up the cables in the bending area.
Figure 76 Binding the cables
Route, bind, and attach excess cables for easy, safe maintenance activities and proper operations.
•
Do not tie the power cables to the slide rails.
•
When you connect a cable to an articulated part, for example, when you connect a grounding
•
cable to a cabinet door, leave enough slack in cables and make sure they are not stressed from any
movement of the part.
Cables must be protected at points where they might rub or come in contact with sharp edges or
•
heated areas. Use high temperature cables near heat sources.
• Securely fasten cables and take adequate measures to prevent loose connections.
Figure 76. To avoid cable core break due to
137
Figure