Configuring Temperature Alarm Thresholds For A Card - H3C S12508-AC Installation Manual

Field
Total current(A):
ID
Input-Err
Output-Err
Fan-Err
Status
Configuring temperature alarm thresholds for a
card

Configuring temperature alarm thresholds for a card

Use the following command to set temperature alarm thresholds for a card. When the temperature of a
card exceeds a threshold, the switch generates alarm signals.
Follow these steps to configure temperature alarm thresholds for a card:
To do...
Enter system view
Configure temperature alarm
thresholds for a card (standalone
mode)
Configure temperature alarm
thresholds for a card on a specified
member switch (IRF mode)
Displaying the temperature information of your switch
Use the display environment command to display the temperature information of the sensors on the cards,
including the current temperature and temperature thresholds.
# Display the temperature information of the cards on the switch.
<Sysname> display environment
In standalone mode:
Description
Total output current
1/1 through 1/6 correspond to power module IDs 1
through 6, and 2/1 through 2/6 correspond to power
module IDs 7 through 12.
Input error
Output error
Fan error
Power supply status of the card, which can be:
•
on: The card is normally supplied with power.
•
absent: The card is not in the slot.
•
wait: The card is not powered on because of
insufficient system power and will be supplied with
power once the system has enough power.
•
off: The card is unsolicitedly powered off due to user
operation or over-temperature protection and will not
be automatically powered on.
Use the command...
system-view
temperature-limit slot slot-number { inflow | hotspot
| outflow } sensor-num LowerLimit WarningLimit
[ AlarmLimit ]
temperature-limit chassis chassis-number slot
slot-number { inflow | hotspot | outflow }
sensor-num LowerLimit WarningLimit [ AlarmLimit ]
70
Remarks
—
Optional
Optional