Switch Moving - H3C S12500 Installation Manual

Make sure the ESD wrist strap is correctly grounded.
Figure 1 Attaching an ESD wrist strap to an S12508

Switch moving

IMPORTANT:
For personal safety, at least four people are required to move an S12518 switch.
When you move an H3C S12500 switch, follow these guidelines:
•
Remove all the external cables (including the power cords) before moving the chassis.
•
For personal safety, have several people to move the switch carefully.
•
When moving the switch, hold the handles at both sides of the chassis. Do not hold the plastic
panel of the chassis, the handle of the fan tray, the handle of the back cover of the chassis, or
the air vents of chassis. Any attempt to carry the switch with these parts might cause equipment
damage or even bodily injury.
2