H3C S12508-AC Installation Manual page 79

3 Absent
4 Normal
5 Absent
6 Absent
Line-card power status:
Slot Board-Type
---- ---------------
2 None
3 None
4 None
5 None
6 None
7 None
8 LST1GT48LEC1
9 None
Table 18 display power-supply verbose command output description
Field
System power-supply policy:
System power-module redundant(configured):
System power usable:
System power redundant(actual):
System power allocated:
System power available:
SYSTEM POWER USED(CURRENT):
System power monitoring unit:
Software version:
Type
In/Out
Rated-Vol(V)
Existing
Usable
Redundant(actual)
Tray
Value(V)
Upper-Threshold(V)
Lower-Threshold(V)
Watts Status
----- ------
-- Absent
-- Absent
-- Absent
-- Absent
-- Absent
-- Absent
190 On
-- Absent
Description
Configurations of the power management function
Number of redundant power modules configured in the
system
Power currently available in the system, in watts
Redundant power currently available in the system, in
watts
Power that has been allocated, in watts
Remaining power in the system, in watts
Current power, in watts
Software version of the power monitoring module
Power module model:
•
•
Input/output current type
Rated voltage, in watts
Total number of power modules
Number of power modules being used
Number of redundant power modules
Power frame ID
Output DC voltage, in volts
Upper limit of output voltage, in volts
Lower limit of output voltage, in volts
69
PSE9000: Old-model AC power system
PSE9000-A: New-model AC power system