Replacing A Cf Card - H3C S12508-AC Installation Manual

Replacement procedure
To replace a fan tray:
Loosen the captive screws on the fan tray.
1.
Pull out the fan tray along the slide rails. Put the removed fan tray in an antistatic bag or in its
2.
original shipping materials.
Insert the new fan tray into the fan tray slot along the slide rails. Push the fan tray in the slot until
3.
it makes close contact with the backplane of the chassis.
Finger-tighten the captive screws and then use a screwdriver to fasten the screws to make sure that
4.
the fan tray is firmly fastened.
Figure 65 Replace a fan tray
A: Fan tray to be removed

Replacing a CF card

Figure 66 CF card slot
(1) CF card cover
(3) CF card
The CompactFlash (CF) card is installed on the MPU of an S12500.
B: Fan tray to be installed
(2) CF card eject button
(4) CF card LED
97