Aircoat Round Jet Spray Process - WAGNER GA 4000ACIC-R Translation Of The Original Operating Manual

VERSION 06/2013
OPERATING MANUAL
5.5.2

AIRCOAT ROUND JET SPRAY PROCESS

With the AirCoat round jet process, the spray product is normally atomized at a pressure of
3-12 MPa; 30-120 bar; 435-1740 psi.
The air at 0.05-0.25 MPa; 0.5-2.5 bar; 7.2-36 psi normally produces a soft jet. The spray jet
diameter can be adjusted by turning the nozzle nut.
The multi-channel swirl nozzle produces fi ne paint particles, while at the same time
reducing their forwards speed and swirling them to produce a rotating motion. The result
is a soft, extremely well atomized spraying cloud.
AirCoat air
Spray product
AirCoat air
Advantages:
Large application volume.
Low fogging tendency.
Good fi nish.
High viscosity products can easily be applied.
ORDER NUMBER DOC 2312956
Nozzle nut
Multi-channel swirl nozzle
Spray jet
27