Air Atomizing Spray Process; Round Jet Spray Process - WAGNER GA 2000EAC Translation Of The Original Operating Manual

EDITION 12/ 2008
OPERATING MANUAL
4.5

AIR ATOMIZING SPRAY PROCESS

4.5.1

ROUND JET SPRAY PROCESS

In the AirCoat process, high pressure of 3-15 MPa; 30-150 bar; 435-2176 psi is used to atom-
ize the material. The AirCoat air at 0-0.25 MPa; 0-2.5 bar; 0-36 psi produces a soft jet, which
largely eliminates the problem of overlapping boundaries. The spray jet can be adjusted
by turning the nozzle nut.
AirCoat air
Material
AirCoat air
Advantages of AirCoat
•
High painting capacity
•
Low fogging tendency
•
Good fi nish
•
High- viscosity paints can easily be applied
PART NO. 350741
Nozzle nut
Multi-channel swirl nozzle
GA 2000EAC, GA 2005EAC
Spray jet
19