Differential Ring Signals - iPECS LIP-7008D User Manual

LIP-7008D
Ring Mode –
• /
TRANS PGM
Speaker Mode –
• /
TRANS PGM
To screen a call in the Ring mode:
• Press the flashing
the station speaker and stored in the voice mailbox (in the Speaker
operation mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:
• Press the illuminated
To talk with the caller and record the conversation in Voice Mail:
• Press the illuminated
To answer the call and cancel the voice message recording:
• Press the illuminated
Voice Mail disconnected.
3.4

Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which
are ringing.
differentiating ring from one phone to another. Four of the tones are
stored in the phone's permanent memory; the remaining ten tones are in
the system's memory. Four of these ten can be downloaded into the
phone's memory for use as the 5
operation
To download a Ring Tone from System to the phone's memory:
• Press
TRANS
• Dial 1 for Ring Tones,
Dial 5 for Ring Tone download,
•
• Dial the memory location to receive the tone (5-8),
• Dial tone number 0-9, tone is heard,
Press
•
HOLD
To select a Ring Tone from phone's memory:
• Press the
• Dial 1 for Ring Tones,
Dial 1 or 2 for Internal or External ring,
•
• Dial tone number 1-8,
• Press
HOLD
+ + 564 + 0 +
FLEX
+ + 564 + 1 +
FLEX
button, the caller's voice is broadcast over
AME
SPEAKER
MUTE
AME
The iPECS Phone has 14 Ring Tones available for
/ ,
PGM
/
to download.
SAVE
/ button,
TRANS PGM
/
to make the selection.
SAVE
/
HOLD SAVE
/
HOLD SAVE
button.
button.
button, the caller is connected and the
th th
to 8
Ring Tone.
6
User Guide