Differential Ring Signals - iPECS LIP-8012D User Manual

LIP-7016D/7024D
OPERATION
To assign an AME button:
Ring Mode –

/
TRANS PGM
Speaker Mode –

/
TRANS PGM
To screen a call in Ring mode:

Press the flashing
the station speaker and stored in the voice mailbox (in the Speaker
mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:

Press the illuminated
To talk with the caller and record the conversation in Voice Mail:

Press the
To answer the call and cancel the voice message recording:

Press the illuminated
Voice Mail disconnected.
2.4

Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to tell which
are ringing.
differentiating ring from one phone to another. Four of the tones are
stored in the phone's permanent memory; the remaining ten tones are in
the system's memory. Four of these ten can be downloaded into the
phone memory for use as the 5
OPERATION
To download a Ring Tone from System memory:

Press
TRANS

Dial 1 for Ring Tones,

Dial 5 for Ring Tone download,

Dial the phone's memory location to receive the tone (5-8),

Dial tone number 0-9, tone is heard,

Press
HOLD
To select a Ring Tone from phone memory:

Press the

Dial 1 for Ring Tones,

Dial 1 or 2 for Internal or External ring,

Dial tone number 1-8,

Press
HOLD
+ + 564 + 0 +
FLEX
+ + 564 + 1 +
FLEX
button, the caller's voice is broadcast over
AME
SPEAKER
button.
MUTE
AME
The iPECS Phone has 14 Ring Tones available for
/ ,
PGM
/
to download.
SAVE
/ button,
TRANS PGM
/ to make the selection.
SAVE
/
HOLD SAVE
/
HOLD SAVE
button.
button, the caller is connected and the
th th
to 8 Ring Tone.
11
User Guide