Differential Ring Signals - iPECS LIP-8002E User Manual

LIP-8002E/2AE
To answer a Call Waiting:
•
•
To active One-time DND:
•

2.3 Differential Ring Signals

In iPECS-LIK
To download a Ring Tone from System memory:
•
•
•
•
•
•
To select a Ring Tone from phone memory:
•
•
•
•
•
of the existing call, as an indication of another call
waiting.
While busy, certain stations can activate Voice-Over to
your phone. When used audio is received from both the
active call and the Voice-Over announcement.
Respond to any of these Off-hook Signals by: placing
the existing call on Hold and responding to the new
incoming call, activating
Press , and/or
HOLD
Press the button.
FLEX
Press the button.
DND
When multiple phones in a small area ring, it can be
difficult to tell which are ringing. The iPECS Phone has
14 Ring Tones available for differentiating one phone's
ringing from another. Four of the tones are stored in the
phone permanent memory; the remaining ten tones are
in the system memory.
downloaded into the phone memory for use as the 5
th
8 Ring Tone
Press /
TRANS PGM
Dial 1 for Ring Tones,
Dial 5 for Ring Tone download,
Dial the phone's memory location to receive the tone (5-8),
Dial 0-9 for the desired tone number; a sample tone is played
downloading the selected one.
Press to download and a confirmation tone is heard.
HOLD
Press the /
TRANS
Dial 1 for Ring Tones,
Dial 1 or 2 for Internal or External ring,
Dial 1-8 for the desired tone number; a sample tone is heard,
Press to make the selection
HOLD
,
button,
PGM
6
One-time DND.
Four of these ten can be
User Guide
th
to