Christie CP4230 User Manual page 157

ICP File Management (ICP) (Continued)
FCOP
FREN
EXAMPLES:
(ICP+FSET "ones4K_LE.LUT-SCC") Copies the "ones4K_LE.LUT-SCC" PCT file from the TPC's ftproot directory to the
LUT-SCC directory on the ICP.
(ICP+FSET "Nominal.MCGD") Copy the "Nominal.MCGD" MCGD file from ftproot to the MCGD directory on the ICP.
(ICP+FDEL "Nominal.MCGD") Deletes the "Nominal.MCGD" file from the ICP.
ILS File (ILF)
Set or get the current ILS file for the current or a specific channel.
SUBCODE
C1xx
NONE
SAVE
FDEL
EXAMPLES:
(ILF+C101 "ILS Flat") Set ILS file for channel 1 to file "ILS Flat"
(ILF?L) List all available ILS files
(ILF 1) Set ILS file for current channel to index 1 in file list
(ILF+Save "filename") Save the active ILS values to a file named "filename". If the file doesn't exist, it will be created. If the
file already exits, it will be overwritten.
(ILF+FDEL "LensSetup1") Delete the "LensSetup1" ILS file from the system.
(ILF+FDEL 3) Delete the ILS file at index 3 in the list.
Intelligent Light System Config (ILS)
Enable/disable the Intelligent Lens System for each channel.
SUBCODE
ACLB
CALB
CSTS
INST
NONE
CP4230 User Manual
020-100621-02 Rev. 1 (01-2012)
Downloaded From projector-manual.com Christie Manuals
Not supported.
Not supported.
DESCRIPTION OF USE
Set or get the current ILS file for a specific channel.
Select the ILS file for a current channel.
Save the currently active ILS data to a file. Will overwrite an existing file with the same name. Requires
advanced access level.
Delete an ILS File
DESCRIPTION OF USE
Enable/disable the Auto Lens Mount and Lens reset feature. Once ACLB is turned on, lens mount and lens
system will be reset automatically when system is powered on.
Calibrate travel range and backlash on specified. Only valid parameter for this command is 5. SET only
command.
Motor calibration status (0-100%)
Sets ILS to installed
Enable/Disable the Intelligent Lens System for each channel. (1/0)
Appendix B: Serial API
B-7