Christie CP4230 User Manual page 167

Hide thumbs Also See for CP4230:
Table of Contents

Advertisement

Measured Color (MCG) (Continued)
DATA
SAVE
EXAMPLES:
(MCG+C108 "Nominal") Use file "Nominal" on channel 108
(MCG+C108?) Get measured color file name on channel 108
(MCG?L) List all entries of measured color control
(MCG+DATA 123 31786 00333 0 100000 66000 1 88899 2154 5441) Set the active MCGD measurement values to
RedX=0.00123,
RedY=0.31786, GreenX=0.00333, GreenY=0.00000, BlueX=1.00000, BlueY= 0.66000, WhiteX=0.00001, WhiteY=0.88899,
BlackX=0.02154, BlackY=0.05441
(MCG+DATA?) Retrieve the 10 active MCGD measurement values.
(MCG+SAVE "filename") Save the 10 active MCGD measurement values to a file named "filename". If the file doesn't exist, it
will be created. If the file already exists, it will be overwritten.
Monitor Card Cage Fans (MCF)
Enables or disables the monitoring of the two additional card cage fans.
SUBCODE
NONE
EXAMPLES:
(MCF 1) Start monitoring the card cage fans
Channel Name (NAM)
Set the descriptive channel name for the specified channel
SUBCODE
Cxxx
NONE
EXAMPLES:
(NAM+C108 "Scope 2.39") Set channel name for channel 108
(NAM+C108?) Get channel name for channel 108
Network Setup (NET)
Set the network parameters for Eth0, Gateway, and Subnet 0.
SUBCODE
DLP0
ETH0
GATE
HOST
CP4230 User Manual
020-100621-02 Rev. 1 (01-2012)
Downloaded From projector-manual.com Christie Manuals
Set/Get active MCGD measurement values. The order is RedX, RedY, GreenX, GreenY, BlueX, BlueY,
WhiteX, WhiteY, BlackX, BlackY. The range for each value is 0 - 100000. The values represent MCGD
measurement values multiplied by 100000.
Saves the active MCGD measurement values to a new or existing MCGD file. (SET Only Command)
DESCRIPTION OF USE
Set to 1 to monitor and 0 to not monitor.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Select channel name for the current channel.
DESCRIPTION OF USE
Set the IP address for the MGMT Ethernet controller (deprecated).
Set the WAN IP address for the projector
Set the WAN Gateway for the projector
Host name
Appendix B: Serial API
B-17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp2230

Table of Contents