Lamp; Physical Specifications - Christie CP4230 User Manual

A.7 Lamp
Type:
Power (software adjustable):
CDXL-20
CDXL-30
CDXL-45
CDXL-60
NOTES: 1) The lamp power supply is current regulated to a maximum of 180 A. Therefore the maximum
power specification for a given lamp may not be achievable until the lamp has aged, since lamp voltage
increases with hours of use.
2) The maximum power of the lamp power supply is restricted to 7000W ± 100W.
Average Life:
CDXL-20
CDXL-30
CDXL-45
CDXL-60
Wait time between lamp strikes:
NOTE: Projectors typically force a 10 minute cool down period. Ensure you do not re-strike the lamp any
sooner than 2 minutes into this cool down period since hot re-strikes reduce lamp life.
Other lamps with bulb diameters not exceeding 70mm may also be used, however the projector may not meet
its specified light output rating. Such lamps include the following:
CXL-20
NOTE: CXL-20 lamp requires lamp adaptor kit listed below in Section A.11.2 Accessories (sold sepa-
rately)
CXL-30
A.8 Physical Specifications
Overall Size (L x W x H):
(including lens mount, stack and feet)
Weight:
As installed with lens
Shipping (includes packaging)
Operating Position:
Rotation about projection axis
Tilt of projection axis from horizontal
CP4230 User Manual
020-100621-02 Rev. 1 (01-2012)
Downloaded From projector-manual.com Christie Manuals
Xenon bubble
1000W min., 2000W nom., 2200W max.
1800W min., 3000W nom., 3300W max.
2700W min., 4500W nom., 4950W max.
3600W min., 6000W nom., 6600W max.
3500 hours
2500 hours
900 hours
1000 hours
2 minutes min.
(2.0kW Xenolite® bulb)
(3.0kW Xenolite® bulb)
1211 mm (47.7 inches) x 635 mm (25.0 inches) x 483 mm
(19.0 inches)
111 kg (245 lbs)
143 kg (315 lbs)
± 15 degrees maximum
± 15 degrees maximum
Appendix A: Specifications
A-9