6: Projector Menus; The Touch Panel Controller (Tpc) - Christie CP4230 User Manual

6 Projector Menus
This section provides information and procedures for using projector menus. You can use projector menus to
adjust projector settings and view status information.
6.1

The Touch Panel Controller (TPC)

The TPC is a touch-sensitive screen that you use to control the projector. You can use the TPC to turn the
projector and lamp on or off, select channels, and view status information. The TPC is mounted on the rear of
the projector. You can tilt and turn the TPC to improve the viewing angle. There are two USB ports under a
cover on the rear of the TPC that you can use to download log files and install software upgrades. You can
disconnect the TPC from the projector and an optional cable allows you to control the projector from a
maximum distance of 100 feet.
If the TPC fails or is disconnected, press the emergency start button that is recessed on the faceplate. This starts
the projector, turns the lamp on, and opens the douser.
CP4230 User Manual
020-100621-02 Rev. 1 (1-2012)
Downloaded From projector-manual.com Christie Manuals
6-1