NOTE: Make sure the cover is between the mounting tabs.
8. Connect the harness wires.
9. Position the lens clamp DOWN to lock the lens assembly in place.
10. Calibrate the lens. See
11. Install the shroud.
2.12 Install the Optional Anamorphic Lens
1. Install the M-MALM according to the instructions provided with the kit. Ensure the primary lens is
optimized first for best optical alignment, offset and boresight.
2. Loosen the holding clamp on the auxiliary lens mount and adjust rotation of the whole anamorphic lens so
the image remains perfectly square with anamorphic in and out.
CP4230 User Manual
020-100621-02 Rev. 1 (01-2012)
Downloaded From projector-manual.com Christie Manuals
Section 4.3 Basic Image Alignment
Section 2: Installation and Setup
for details.
2-13