ADJUSTING/SETTING
5.
MECHANICAL ADJUSTMENTS
5.1
Adjustment of the Position of the Scanner and 2nd/3rd Mir-
rors Carriage
NOTE
• This adjustment is to be made when the Scanner Drive Cables has been replaced or
rewound.
<Adjustment Procedure>
4. Press the Scanner up against the jigs and tighten the fixing screws.
1. Remove the Original Glass.
☞ 1-25
2. Fit the Scanner/Mirrors Carriage Positioning Jigs
in position. Then, press the 2nd/3rd Mirrors Car-
riage up against the jigs.
4035D106AA
3. Loosen the fixing screws and adjust as neces-
sary so that there is no clearance between the
2nd/3rd Mirrors Carriage and the jigs.
4035D107AA
2-55
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
4035D108AB