Draw Wireframe/Vertex; Force Warp Output/Checkerboard - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 16
CMA: Warp Editor
select will also be affected as you move selected points. The amount of change depends on the
the proximity of a control point to one that is being moved.
Elasticity not applied

Draw Wireframe/Vertex

By default, both the Wireframe (the gridlines connecting control points on the warp) and the
Vertex (all of the control points on the warp) are visible. You have the option to deselect and
hide either or both the wireframe and vertex.

Force Warp Output/Checkerboard

Force Warp Output allows you to see a warp
output while actively modifying it.
Note: Be aware that Force Output has the potential to override the output of
the control board.
To display the warp-edited output:
1. With the warp editor enabled, select the
file from the File Name drop down field to
view in the editor. These files are
available for recall from the control desk
at a later point.
2. To display the selected file on Output 1,
select the same file from the drop down
list, and select force output. The image
that is being displayed is being affected
by the warp grid.
3. Make changes as needed to the warp by selecting control points, editing, and deselecting.
Note: The map is updated when you let go of the mouse button after
dragging, ie. on mouse-up.
254
Control Point Moved
Elasticity applied
DLHD Digital Light User Manual