Sphere - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 16
CMA: Warp Editor

Sphere

When you select the Sphere shape, you can set
the following:
Select Inside Surface if you want to display the
sphere as a concave surface.
You can choose the x, y and z coordinates as
the spherical mesh's centerpoint.
Define the Latitude and Longitude to choose a portion of the sphere.
Sphere Default Geometry
Note: Once you click New, the Curved Geometry options cannot be changed
unless you click Reset and start a new Sphere mesh.
246
Centre [x] [y] [z]0.00.00.0
Latitude (Deg) Start 65.00End 115.00
Longitude (Deg)Start 75.00End 105.00
DLHD Digital Light User Manual