Creating Custom Content For The Collage Generator Effect - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 12
Global Functions: Collage Generator™
6. Under Collage Config.; select 1 for a 2x1
7. Select each individual GLOBAL LAYER; use Collage Cell to assign collage section to each
fixture; for example select 0 for the left display device, and 1 for the right display device.
8. Select ALL GLOBAL LAYERS; under Alignment Control select Pattern Normal Blend. This will
bring up the standard alignment grid.
9. Under Edge Blend Horz.; set the value to 50%. (This will set a blend size)
10. Align the grid using the following:
• Position
• Zoom/Focus
• Keystone
• Keystone Ratio
11. Once grid is aligned; Set Alignment Control to Graphics Normal Blend.

Creating Custom Content for the Collage Generator Effect

There are two main steps to process HD footage into DL.3, DL.2 and Axon compliant media for
use with the Collage Generator.
First, acquire or commission High-resolution media footage or stills. In most cases, scaling and
cropping of the media is a simple process. However, certain types of media such as footage of
people or round objects like planets may require more sophisticated cropping and scaling to
optimize display in certain aspect ratios.
104 DLHD Digital Light User Manual