Color Cycle; Color Deconverge - High End Systems DLHD High Definition Digital Light User Manual

Color Cycle

Effect Mode parameter DMX value = 14
The image's color components cycle through RGB, black, and white. When no Red Green or Blue
is added, image fades from full white, to normal image, to black. When RGB/CMY is added the
image fades from the RGB value, to the image with color added.
Modifier 1: Increases red color component from 0 = no adjustment to 255 (100%) = maximum
red saturation.
Modifier 2: Increases green color component from 0 = no adjustment to 255 (100%) =
maximum green saturation.
Modifier 3: Increases blue color component from 0 = no adjustment to 255 (100%) =
maximum blue saturation.

Color DeConverge

Effect Mode parameter DMX value = 39
This effect separates the different color components of an image and offsets them from the
original image position.
Modifier 1: Moves the image's red component up from 0= no adjustment to 255 (100%) =
maximum distance from original position.
Modifier 2: Moves the image's green component down and right from 0= no adjustment to 255
(100%) = maximum adjustment.
Modifier 3: Moves the image's blue component down and left from 0 = no adjustment to 255
(100%) = maximum blue saturation.
Original Content
DLHD Digital Light User Manual
Effect Mode Options Descriptions
Object Effect
Object Effect
Modifier 1 parameter DMX = 211
Modifier 2 parameter DMX = 255
Modifier 3 parameter DMX = 67
CHAPTER 13
Global Effect
Global Effect
113