Horizontal Cylinder
When you select the Horizontal shape, you can
set the following:
Select Inside Surface if you want to display the
sphere as a concave surface.
You can choose the x, y and z coordinates as
the cylinder's centerpoint.
Define the Latitude to choose a portion of the cylinder.
Horizontal Cylinder: default geometry
Horizontal Cylinder:
Centre [x],[y],[z]
1
Latitude (Deg)
Start
Note: Once you click New, the Curved Geometry options cannot be changed unless you click
Reset and start a new Cylinder mesh.
DLHD Digital Light User Manual
1 0
70.00End 105.00
CHAPTER 16
CMA: Warp Editor
247