Cone - High End Systems DLHD High Definition Digital Light User Manual

Cone

When you select the Cone shape, you can set
the following:
Select Inside Surface if you want to display the
sphere as a concave surface.
You can choose the x, y and z coordinates as
the cone grid's centerpoint.
Define the Latitude and Longitude to choose a portion of the cone.
Cone Default Geometry
Note: Once you click New, the Curved Geometry options cannot be changed unless you click
Reset and start a new Cone mesh.
DLHD Digital Light User Manual
Cone:
Centre [x],[y],[z] 0
Longitude (Deg) Start
CHAPTER 16
CMA: Warp Editor
0 0
75.00End 105.00
249