result with the Centre on Figure option selected and the figure on the right shows the result
when Centre on Selection is selected.
Rotation
You can rotate a selection of control points in
the x, y and z direction.
First, set the degrees of rotation for each step from .01 to 359. Then you can press the
corresponding button to increase or decrease the rotation for X, Y or Z
Rectangular Grid with control point selected.
Scale
You can scale a selection of control
points in the x, y and z direction.
DLHD Digital Light User Manual
Rectangular Grid with selection rotated 60.00 in
the Y- direction.
CHAPTER 16
CMA: Warp Editor
251