CHAPTER 16
CMA: Warp Editor
Vertical Cylinder
When you select the Horizontal shape, you can
set the following:
Select Inside Surface if you want to display the
sphere as a concave surface.
You can choose the x, y and z coordinates as
the cylinder's centerpoint.
Define the Longitude to choose a portion of the cylinder.
Vertical Cylinder: Default Geometry
Note: Once you click New, the Curved Geometry options cannot be changed unless you click
Reset and start a new Cylinder mesh.
248
Vertical Cylinder:
Centre [x],[y],[z]
1
Longitude (Deg)
Start
1 0
75.00End 105.00
DLHD Digital Light User Manual