Camera Options; Centre Of Operations - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 16
CMA: Warp Editor
Once you have selected the Geometry and click on New, the mesh being edited will be included
in the display with control points indicated as black dots.
This current file will be automatically assigned a name in the File Name field that will be
maintained throughout the editing sessional and can be renamed by the user outside of the
editing mode.

Camera Options

The Camera Options field lets you select the
way you want to view the editing grid. The
perspective view is the option most associated with sketching. An orthographic gives a typical
drafting view with no perspective indication.

Centre of Operations

When you drag a set of control points to shape
the mesh, you can reference the change to the
center of the figure or to the center of the editing points you have selected to move. In the
example below, 12 control points were selected and scaled down. The grid on the left shows the
250
File Name
DLHD Digital Light User Manual