Mounting The Fixture; Fog Machine Warning - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 2
Setup and Configuration
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket

Mounting the Fixture

You can mount DLHD fixtures suspended from a support system (such as a truss) or
freestanding on its base.
WARNING!
Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
CAUTION!
Always use a secondary safety cable when mounting this
fixture.
Fixture must be installed and operated by trained personnel
only.
Maintain a minimum focus distance of 1.4 meters from a
1.4 m
combustible object.
Do not mount on a flammable surface.
NOTE: Due to the wide variety of possible lighting designs, High End
Systems cannot make specific mounting recommendations. Consider
the following procedure as a suggested guideline only.

Fog Machine Warning

Like all high quality video projection units, the DLHD fixture must be kept protected from
excessive amounts of glycol fog, mineral oil, and smoke. DLHD incorporates a two-stage air
filtering system with additional washable prefilters in the head and base housing to reduce
these risks to a minimum. However, you must follow these guidelines to ensure continued
operation of the fixture:
• Air filters (both fixture and projector) should be checked and cleaned on a regular basis.
When used in a closed or fixed environment where fog or haze is used, we recommend at
least a weekly check.
• Do not situate DLHD in areas of high fog density such as directly in front of a fog machine or
mineral oil hazer.
• Minimize the exposure of DLHD to both glycol fog and mineral oil.
DLHD is a highly complex and sensitive electro-optical device and care and thought in how it is
used, rigged, and positioned will maximize the product's life and your investment.
NOTE: Failure to follow these guidelines and carry out regular maintenance
will void the warranty.
8
eller
DLHD Digital Light User Manual