Resetting The Smart View Display - Taylor-Dunn B0-254-48 Operation, T Roubleshooting And Replacement Parts Manual

ITEM # PART #
1 71-100-00
2 71-039-11
3 88-817-07
5 01-200-09
6 74-010-00
7 94-304-14
8 71-039-02
71-120-10
9 71-119-99
88-025-00
10 71-120-90
11 71-501-00
Not Shown 95-913-00
NOTE: If your vehicle was not originally equipped with the Smart View

Resetting the Smart View Display

The meter should only be reset after the preventative maintenance has been performed. Taylor-Dunn
part number 62-027-40 Hand set (available with instructions as part number 62-027-61) must be used to
reset the meter. Refer to the handset instructions (D0-100-08) for information on the procedure to reset
the display.
Instrument Panel
DESCRIPTION
Aux. switch
SPST rocker switch
Sheet metal screw
Dash console, no cab
Smart view display (see information below)
Dash
F&R switch
Key switch (incl #10)
Spacer
Terminal screws
Key
Horn switch
Plastic hole plug, 1/2"
display, then the Sevcon speed control must be reprogrammed
before the display will function.
If you have the Smart View display and wish to have the
maintenance feature turned on, then the Sevcon speed control
must be reprogrammed.
To reprogram the Sevcon speed control, the speed control must
be returned to the factory. Contact your local Taylor-Dunn
for more information.
The Smart View Display will only work with the Sevcon control
system.
Parts
Illustrated Parts
® distributor
Page 29
QTY
Opt
1 or 2
8
1
1
1
1
1
1
2
1
1
-
®