Table of Contents
Advertisement
General Description
Host Computer Requirements
16
Freescale Semiconductor, Inc.
Separately purchased Motorola personality products include:
•
An emulation module (EM): One of many printed circuit boards
that complete MMDS functionality for one or more particular
MCUs. The two DIN connectors on the bottom of the EM fit into
connectors on the top of the MMDS0508 platform board for power
and signal connections. The EM also has a connector for the
target cable. EMs are purchased separately from the platform
board and are shipped with a user's manual containing
information specific to the module.
•
Optional target cable: A separately purchased target cable that
is part of a cable assembly, used to connect the target system to
the MMDS system
•
Optional target head adapter: A separately purchased target
head adapter that is part of a cable assembly, used to connect the
target system to the MMDS system
User supplied components include:
•
Host computer: For further information refer to
Requirements
The host computer for the MMDS must be hardware and software
compatible with IBM AT or PS/2 computers. The host computer must run
DOS 5.0 or later versions. The host software requires approximately
512 Kbytes.
An asynchronous communications port, configured as COM1, COM2,
COM3, or COM4, is required for communications between the MMDS
and the host computer.
General Description
For More Information On This Product,
Go to: www.freescale.com
Host Computer
MMDS0508OM/D
MOTOROLA
Advertisement
Table of Contents
