Freescale Semiconductor Motorola MMDS0508 Operation Manual page 186

Command-Line Commands
V
NOTE:
NOTE:
186
Freescale Semiconductor, Inc.
Set/Clear V Bit
This command is for the MMDS08 only.
The V command sets the V bit in the condition code register (CCR) to
the specified value.
The CCR bit designators are at the lower right of the CPU window. The
CCR pattern is V11HINZC (V is overflow, H is half-carry, I is IRQ
interrupt mask, N is negative, Z is zero and C is carry). A letter in these
designators means that the corresponding bit of the CCR is set; a period
means that the corresponding bit is clear.
Syntax:
V 0|1
Where:
0 Clears the V bit
1 Sets the V bit
Example:
>V 0 Clears the V bit in the CCR.
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
V
MMDS0508OM/D
MOTOROLA