Freescale Semiconductor Motorola MMDS0508 Operation Manual page 138

Command-Line Commands
LF
138
Freescale Semiconductor, Inc.
Log File
The LF command starts or stops logging of commands and responses
to an external file. If logging is not enabled, enter this command to start
logging. While logging remains in effect, any line that is appended to the
command log window also is written to the log file. Logging continues
until another LF command is entered; this second command disables
logging and closes the log file.
If the specified file does not already exist, this command creates the file.
If the specified file does exist already, the command prompts for
overwrite or append:
File exists, Rewrite or Append? [R]:
If <CR> (accept the default) is pressed, or R and <CR>, the log entries
overwrite the data in the existing file. If A and <CR> are pressed, the
system appends log entries to the file.
Syntax:
LF <filename>
Where:
< filename >
The DOS filename of the log file; the
command interpreter does not assume a
filename extension.
Examples:
>LF log file Start logging. Write to file log file (in the
current directory) all lines added to the
command log window.
>LF If logging is enabled: Disable logging and
close the log file.
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
LF
MMDS0508OM/D
MOTOROLA