Freescale Semiconductor Motorola MMDS0508 Operation Manual page 134

Command-Line Commands
HREG
NOTE:
134
Freescale Semiconductor, Inc.
Set H Register
This command is for the MMDS08 only.
The HREG command sets the upper byte of the index register to the
specified value.
Syntax:
HREG < n >
Where:
< n > The new value for the H register
Example:
>HREG F0 Set the H register value to F0.
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
HREG
MMDS0508OM/D
MOTOROLA