Freescale Semiconductor Motorola MMDS0508 Operation Manual page 135

HX
NOTE:
MMDS0508OM/D
MOTOROLA
Freescale Semiconductor, Inc.
Set H:X Index Register
This command is for the MMDS08 only.
The HX command sets both bytes of the concatenated index register
(H:X) to the specified value.
Syntax:
HX < n >
Where:
< n > The new value for the H:X register
Example:
>HX 0400 Set the H:X index register to $400.
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
Command-Line Commands
Command Explanations
HX
135