Freescale Semiconductor Motorola MMDS0508 Operation Manual page 142

Command-Line Commands
LOADTRIGGERS
142
Freescale Semiconductor, Inc.
Load Bus State Analyzer Setup
The LOADTRIGGERS command loads the bus state analyzer setup
information from the specified file. To write such a file, use the bus state
analyzer setup screen to define the triggers, then press the F6 key.
Syntax:
LOADTRIGGERS [< filename >]
where:
< filename > The name of the setup file to be loaded. An
extension of .SET is the default and can be
omitted. The extension must be specified for files
with other extensions. You can enter a pathname
followed by the asterisk (*) wildcard character. In
that case, the command displays a window that
lists the files in the specified directory that have
the .SET extension.
Examples:
>LOADTRIGGERS BSA.SET Make BSA.SET the current
>LOADTRIGGERS BSA8
>LOADTRIGGERS A:*
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
LOADTRIGGERS
BSA setup file.
Make BSA8.SET the current
BSA setup file.
Display the names of the .SET
files on the diskette in drive A:,
for user selection of a file.
MMDS0508OM/D
MOTOROLA