Table of Contents
Advertisement
Installation
Logic Cables and
Connectors
30
Freescale Semiconductor, Inc.
The diagram below shows the pin numbering for both pod A and pod B
logic cable connectors of the station module.
designations where an LC
a name. The logic clips are used to capture data in the bus state
analyzer. (Pin 9 of both pods provides connection to an external ground.)
In addition, the pod connectors are used as external clock inputs for the
emulator clock and bus state analyzer timetag. The table also provides
color code information for each pod.
The external clock inputs are through pin 17 of each pod. Pod A pin 17
is the external clock input for the emulator. To use this source, make the
desired clock connection to the white probe tip and use the OSC
command to select an external source.
Pod B pin 17 is the external timetag input for the bus state analyzer. To
use this source, make the desired clock connection to the white probe
tip and use the TIMETAG command to select an external time tag source
for the analyzer.
19
•
•
20
Installation
For More Information On This Product,
Go to: www.freescale.com
Table 2
assignment gives each logic clip connection
x
•
•
•
•
•
•
•
•
•
•
•
•
•
•
details the pinout
1
•
•
•
•
2
MMDS0508OM/D
MOTOROLA
Advertisement
Table of Contents
