Table of Contents
Advertisement
Quick Links
Freescale Semiconductor
Hardware Getting Started Guide
MSC8156EVM
This document describes the MSC8156EVM and its related
hardware kit. The MSC8156EVM getting started procedure
explains and verifies the board's basic operation in a
step-by-step format. Settings for switches, jumpers, LEDs,
and push buttons are shown. There are also instructions for
connecting the EVM to your development/debug platform
with CodeWarrior IDE installed.
The MSC8156EVM functions with an integrated
development environment (IDE), such as Freescale
CodeWarrior IDE. Instructions for working with the IDE are
beyond the scope of this document.
© 2010 Freescale Semiconductor, Inc.
Document Number: MSC8156EVMHGSG
Contents
1.Definitions, Acronyms, and Abbreviations . . . . . . . . . . . . 2
2.Bit and Byte Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.Related Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4.Hardware Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.DIP Switch Location Default Settings . . . . . . . . . . . . . . . . 5
6.Power Switch and Push Buttons . . . . . . . . . . . . . . . . . . . . 6
7.Jumper Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8.Connector Default Settings . . . . . . . . . . . . . . . . . . . . . . . . 8
9.LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10.Getting Started Procedure . . . . . . . . . . . . . . . . . . . . . . . 10
11.Next Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rev. 0 10/2010
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Freescale Semiconductor MSC8156EVM
Summary of Contents for Freescale Semiconductor MSC8156EVM
-
Page 1: Table Of Contents
Hardware Getting Started Guide Rev. 0 10/2010 MSC8156EVM This document describes the MSC8156EVM and its related Contents 1.Definitions, Acronyms, and Abbreviations ... . 2 hardware kit. The MSC8156EVM getting started procedure 2.Bit and Byte Conventions . -
Page 2: Definitions, Acronyms, And Abbreviations
MSC8156 Internal Module PCI Express Root Complex RC[x] Reset Configuration Bit x Reset Configuration Word RGMII Reduced General Media Independent Interface RIO Host Bit (in RCW) RJ45 Ethernet Connectors SBETH Simple Boot from Ethernet Bit (in RCW) MSC8156-EVM Hardware Getting Started, Rev. 0 Freescale Semiconductor... -
Page 3: Bit And Byte Conventions
Gbyte = GB = GByte = 1 Gigabyte = 1,073,741,824 bytes Related Reading The MSC8156EVM includes a set of documentation provided on a CD-ROM. Device specific information for devices supported by this EVM are available at www.freescale.com. This EVM supports the following Freescale DSPs: •... -
Page 4: Hardware Kit Contents
Hardware Kit Contents Hardware Kit Contents MSC8156EVM with attached plastic spacers and screws AC/DC 12 V/3.0 A universal power supply k USB cable Type A to Type B One Ethernet cable Figure 1. Hardware Contents The kit also includes the following (not shown): •... -
Page 5: Dip Switch Location Default Settings
DIP Switch Location Default Settings DIP Switch Location Default Settings The MSC8156EVM has four push-button switches (SW1, SW3, SW4, and SW5), one slide power switch (S1), and two dual-in-line package (DIP) switches (SW2 and SW6). See Figure 2 for switch locations and... -
Page 6: Power Switch And Push Buttons
• Default: OFF, ON (= 10 which selects CLKOUT = 100 MHz) SW6.4: MULTIPLEXER SELECT • Default: OFF (= 1 which selects INTERNAL CLK). The default DIP-switch positions define the MSC8156EVM configuration modes listed in Table Table 4. MSC8156EVM Default Configuration Modes... -
Page 7: Jumper Default Settings
Table 6. MSC8156EVM Jumper Default Settings Jumper Name 1-2 Position 2-3 Position (default) RCW_SRC External 22-bits (reduced) Configuration Word C EEPROM RCW J2002 J2004 J2005 Figure 3. MSC8156EVM Jumper (JP) and Connector (J/P) Locations MSC8156-EVM Hardware Getting Started, Rev. 0 Freescale Semiconductor... -
Page 8: Connector Default Settings
SGMII connections. When connected, the PCI Express interface can supply the 12 V power for the MSC8156EVM, which is enabled when S1 is in the OFF position. The connector is designed to conform to several QorIQ development platforms from Freescale Semiconductor. Contact your Freescale sales office for more information. -
Page 9: Led Indicators
LED Indicators LED Indicators Table 8 lists MSC8156EVM LED indicator functions. See Figure 4 for LED locations. Table 8. MSC8156EVM LEDs Ref. Name Color LED On LED Blinking LED Off Internal power supply Green Power Good — failure GPIO17 Orange USER DEFINE. -
Page 10: Getting Started Procedure
LEDs 3 (12V POWER) and LED 1 (POWER GOOD) display a constant green light. b) Power the system off by moving the power switch (S1) to the OFF position. Figure 5. Power and Cable Connections MSC8156-EVM Hardware Getting Started, Rev. 0 Freescale Semiconductor... -
Page 11: Next Steps
Software Installation Guide included on the kit documentation CD. Once the software is set up, you can connect the USB cable between the MSC8156EVM J13 and the development platform (PC or laptop, for example) with the CodeWarrior software installed to begin the configuration and debugging process. - Page 12 Headquarters surgical implant into the body, or other applications intended to support or sustain life, ARCO Tower 15F or for any other application in which the failure of the Freescale Semiconductor product 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0064 could create a situation where personal injury or death may occur. Should Buyer...
Need help?
Do you have a question about the MSC8156EVM and is the answer not in the manual?
Questions and answers