Freescale Semiconductor Motorola MMDS0508 Operation Manual page 181

SXB
NOTE:
MMDS0508OM/D
MOTOROLA
Freescale Semiconductor, Inc.
Set Multiplexer
The SXB command sets the analyzer to capture either a 16-bit timetag
counter and the eight pod B logic clips or a 24-bit timetag counter. The
default is to use the 16-bit timetag and pod B.
When using the logic clip cables, always attach the black clip to ground.
Syntax:
SXB CLIPS|TAGS
Where:
CLIPS Directs the analyzer to capture the pod B logic
clips with 16-bit timetag counter.
TAGS Directs the analyzer to capture a 24-bit timetag
counter.
Example:
>SXB TAGS Select extended time tag bits.
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
Command-Line Commands
Command Explanations
SXB
181