Source Window - Freescale Semiconductor Motorola MMDS0508 Operation Manual

User Screens

Source Window

NOTE:
48
Freescale Semiconductor, Inc.
When a .MAP file exists in the same directory as the .S19 file, the MMDS
software loads both files at the same time and the source code
generated from the .MAP file is available for use in the debug process.
The contents of this window change to source code (and the title
changes to SOURCE:filename.asm) if:
1. A .MAP file has been loaded and
2. The program counter (PC) points to a memory area covered by
the .MAP file.
Once a .MAP file has been loaded and the PC points to an area of user
code, the SOURCE command can be used to toggle between source
code and object code. If a mouse is installed, the symbols that appear at
the bottom of the source window can be selected. Use the mouse or
arrow keys to scroll through the information in the window.
There are several Alt-commands associated with the source window.
The list of Alt-commands appears at the bottom of the debug screen
when the <Alt> key is pushed.
in this window when a source code is displayed.
The F2 function key does not activate this window in the source code
operating mode. The Source window and the Debug F10 window will
both be active at the same time. Use the mouse or arrow keys to
select/scroll the information in the Source window.
User Screens
For More Information On This Product,
Go to: www.freescale.com
Table 6 lists the key commands available
MMDS0508OM/D
MOTOROLA