Personality Files; Using Mmds Software - Freescale Semiconductor Motorola MMDS0508 Operation Manual

Personality Files

NOTE:

Using MMDS Software

NOTE:
MMDS0508OM/D
MOTOROLA
Freescale Semiconductor, Inc.
Various designs of MCUs require different configurations of the MMDS
system. The appropriate setup for each MCU is specified in a unique
personality file.
These files are shipped with separately purchased EMs.
Personality files are usually installed in the directory from which the
MMDS software is executed. These personality files have a standard
extension of.MEM. If a personality file is not located in the working
directory, the software displays a search window used to find the correct
file. To determine the personality files used by a particular EM module,
refer to the appropriate EM user's manual.
More than one personality file can be installed; the MMDS operating
software automatically loads the default personality file that corresponds
to the currently connected EM module. As discussed in the following
paragraph, other personality files can be loaded via the LOADMEM
command or through use of the –M option.
The correct executable file to run is dependent on which type EM is
installed on the MMDS platform board. If an HC05 EM is installed, the
MMDS05.EXE file should be run. If an HC08 EM is installed, the
MMDS08.EXE file should be run.
The following paragraphs discuss the proper syntax for running the
HC05 and HC08 software.
Alternatively, the MMDS can be called from within the RAPID
environment. Running the MMDS05 or MMDS08 from RAPID may
require running RINSTALL, RAPID's configuration set-up program, to
set up the directory path, serial port, etc., as described in the RAPID
user's manual.
If you plan to use the MMDS software in a DOS window under Windows,
use the MMDS05X.EXE or MMDS08X.EXE files.
Loading and Initialization
For More Information On This Product,
Go to: www.freescale.com
Loading and Initialization

Personality Files

37