Freescale Semiconductor Motorola MMDS0508 Operation Manual page 178

Command-Line Commands
STEPFOR
NOTE:
178
Freescale Semiconductor, Inc.
Step Forever
The STEPFOR command begins continuous instruction execution,
beginning at the current program counter (PC) address value. Execution
stops when a key is pressed.
Syntax:
STEPFOR
Do not use any step command (ST, STEP, STEPFOR, STEPTIL, or T)
if the PC points to internal RAM (for instance, option RAM) or EEPROM
or if the code branches into internal RAM or EEPROM.
The step commands are not real-time. They execute one instruction at a
time, then return control to the monitor. Do not rely on timer values.
Example:
>STEPFOR Execute instructions continuously until the
user presses a key.
Command-Line Commands
For More Information On This Product,
Go to: www.freescale.com
STEPFOR
MMDS0508OM/D
MOTOROLA