Table of Contents
Advertisement
Loading and Initialization
MMDS Communication
40
Freescale Semiconductor, Inc.
The host program establishes communications with the MMDS system
and displays the appropriate debug screen as shown in the section on
user screens. If the host program fails to establish communications, an
error screen appears and the system operation is returned to DOS. The
information in the error screen helps determine why the software does
not run.
For best performance of the system, communications between the host
and the station module should be at the maximum available baud rate.
At power-up, the host software automatically sets the maximum baud for
the system.
Reduce the baud rate if a communication error message appears. Refer
to
Running MMDS05
to set the start-up baud rate at 9600. If communication errors persist,
turn off the disk cache (SMARTDRV.EXE) on the computer.
Enter commands in response to the MMDS command prompt (>). When
the emulation and debugging session has been completed, terminate
the session by entering the EXIT or QUIT command.
Loading and Initialization
For More Information On This Product,
Go to: www.freescale.com
and
Running MMDS08
on the preceding pages
MMDS0508OM/D
MOTOROLA
Advertisement
Table of Contents
