General Unit Functions Setup Submenu - Trane IntelliPak I Programming, Troubleshooting Manual

System Programming SETUP
Display Text in:
Display Units Using: ENGLISH NOTATION
1. Press the + or - key until the proper value is displayed. ENGLISH,
SI
2. Press the ENTER key to confirm this choice.
3. Press the NEXT key to advance the cursor.
4. Repeat steps 1 and 2 for the next value.
5. Press the NEXT key until the following screen is displayed (if
applicable).

General Unit Functions Setup Submenu

Press ENTER to Review or Adjust
1. Pressing the NEXT key will bypass this section.
If Remote Panel Mode Input Not Present:
System Mode: AUTO
1. Press the + or - key until the proper value is displayed.
2. Press the ENTER key to confirm this choice.
3. Press the NEXT key to advance the cursor.
4. Repeat steps 1 and 2 for the next value.
5. Press the NEXT key until the following screen is displayed (if
applicable).
Reduce Multi-Unit Startup Power Demand
After Power-Up, Delay Unit Start 0 Sec
1. Press the + or - key until the proper value is displayed.
2. Press the ENTER key to confirm this choice.
3. Press the NEXT key to advance the cursor.
4. Repeat steps 1 and 2 for the next value.
5. Press the NEXT key until the following screen is displayed
(if applicable).
Daytime Warmup Function:
1. Press the + or - key until the proper value is displayed.
2. Press the ENTER key to confirm this choice.
3. Press the NEXT key until the following screen is displayed. (if
applicable)
54
ENGLISH LANGUAGE
ENABLED
Used With: All Units
Factory Presets: Text and Units:
ENGLISH Language, ENGLISH
Notation
Possible Values: Text: ENGLISH,
FRENCH, SPANISH
Units: ENGLISH NOTATION, SI
NOTATION
Used With: All Units
Used With: All Units
Possible Values: System Mode =
OFF/AUTO
Used With: All units.
Possible Values: Range 0-255 Sec
(Default 0 Sec)
Used With: All Units when gas,
electric, or hydronic heat is installed.
Possible Values: ENABLED,
DISABLED
RT-SVP04F-EN