Trane IntelliPak I Programming, Troubleshooting Manual page 118

System Testing & Troubleshooting
Active Diagnostic -- Manual Reset
___________________
The word MORE will only appear if more than one failure has occurred.
Possible Values:
Blocked Air Return
Compressor Contactor Fail - Ckt 1
Compressor Contactor Fail - Ckt 2
Compressor Trip - Ckt 1
Compressor Trip - Ckt 2
Cond Sump Pump Manual Fail
Emergency Stop
Energy Recovery Wheel Proof Failure
Exhaust Fan Failure
Improper Airflow for Dehumid
Cond Sump Heater Failure
OR
Pressing the "NEXT" key to view the diagnostics will prompt the
following screen if a "AUTO RESET" failure has occurred.
Active Diagnostic -- Auto Reset
___________________
The word MORE will only appear if more than one failure has occurred.
118
More
Low Air Temperature Limit Trip
Low Pressure Control Open - Ckt 1
Low Pressure Control Open - Ckt 2
Low Refrigerant Charge - Ckt 1
Low Refrigerant Charge - Ckt 2
Cond Sump Heater
Failure
Manual Reset Return Pressure Limit
Manual Reset SA Static Pressure Limit
Return Fan Failure
Supply Fan Failure
Cond Sump Heater Failure
More
Used With: All units
Factory Presets: N/A
Used With: All units
Factory Presets: N/A
RT-SVP04F-EN