Unit “On” - Trane IntelliPak I Programming, Troubleshooting Manual

General Information
Stop by Network
Initializing
Unit "On"
If the unit has entered an operating state (running), the following display will appear on
the Human Interface LCD screen. When this screen is being displayed, the only
functional keys are the six menu keys (STATUS, SETPOINTS, DIAGNOSTICS, SETUP ,
CONFIGURATION, and SERVICE MODE), the AUTO key, the CUSTOM key, and the STOP
key.
16
Supply Fan ON
Diagnostics
Unit Off
Unit Stopped
External Stop
Emergency Stop
Stop by Network
Unit Starting
Service Mode Off
(Blank)
Shutdown
Initializing
Freeze Avoidance Active
Used With: Top Status Display (Shown
when unit is off or stopped)
Possible Values: Top/Left field: Unit
Off, Unit Stopped, External Stop,
Emergency Stop, Stop by Network, Unit
Starting, Service Mode Off; Top/Right
field: Supply Fan OFF, Supply Fan ON;
Bottom/Left field: (Blank),
Shutdown, Initializing, Freeze
Avoidance Active; Bottom/Right:
(Blank), (Diagnostics)
(Blank)
(Diagnostics)
RT-SVP04F-EN