G4 Web Control Settings Page - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

If the screen is not touched at that point, the device will automatically return to the
Protected Setup page within 10 seconds.
Always calibrate the panel before its initial use, and after downloading new firmware.

G4 Web Control Settings Page

An on-board VNC (Virtual Network Computing) server allows the panel to connect to any remote PC running
a VNC client. Once connected, the client can view and control the panel remotely. The options on this page
allow you to enable/disable G4 Web Control functionality(FIG. 71).
FIG. 71 G4 Web Control page
Features on this page include:
G4 Web Control Page
Back:
Connection Status icon:
G4 Web Control Settings:
Enable/Enabled
Network Interface Select
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Sets the IP communication values for the touch panel:
The Enable/Enabled button toggles between the two G4 activation settings:
• Enable - deactivates G4 Web Control on the panel.
• Enabled - activates G4 Web Control on the panel.
Toggles between the two network interface options:
• Wireless - the panel is communicating via a Wireless Access Point (WAP).
• Wired - the panel is communicating via its mini-USB port.
Protected Setup Pages
75